Sandblasters

K-800 Compact Sprayer

Deal for small-scale jobs, the K-800 is compact, portable, lightweight and low priced. Simply fill the plastic quart container either dry abrasive material; connect your air line to the gun; and you are ready to sand, debar, etch, polish or clean. A great tool to use when a conventional blaster is too much! Maintenance is easy just inspect and replace the 714 ceramic nozzle when needed. The 714 ceramic nozzles can be ordered separate. The K-800 can also double as a solution sprayer when used with degreasers and solvents. The abrasive blasters are intended for use at 125 PSI air pressure of less. Use at higher air pressures constitutes misuse of the product and could result in serious personal injury. Use only with proper safety equipment as set forth in the instructions provided with the unit.

Price.................... $29.99

125 PSI - Max Optimal Operating is: PSI 70-90

L-1084 Tri-Blaster

Controls dust, protects metal surfaces, and wash away residue as you clean and smooth surfaces with this abrasive blasting unit. The Tri-Con L-1084 Tri-Blaster material control valve allows introduction of liquids into the abrasive blasting material. The petcock control valve allows operator regulation of water, oil, or cleaners and mixes them with abrasives and compressed air at the same time. Air pressure of 40-125 PSI operates the unit and optimum pressure of 70-90 PSI. The L-1084 portable blaster uses patented aspirator tubes to siphon abrasive material directly from a bag or bucket and comes equipped with a replaceable ceramic nozzle. For conventional abrasive blasting, simply turn the petcock control valve to the off position or remove the petcock completely and screw in the Allen screw provided in its place. Or use the L-1084 as a pressure washer by substituting water or solution for the abrasives. L-1084 Tri-Blast system with flow control makes it a versatile portable blasting system. It can be used to smooth wood surfaces, remove pain, control dust, etch glass, great for auto maintenance and use as a pressure washer with degreasing cleaner for engines, floors, siding and etc. The abrasive blaster is intended for use at 40-125 PSI air pressure. Use at higher air pressures constitutes misuse of the product and could result in serious personal injury.Read the instructions provided with the unit before using.

Price......................$70.99

125 PSI - Max Optimal Operating is: PSI 70-90

Ceramic Nozzle Replacements …...............................................................6 pack... $12.60

J-700 Portable Abrasive Blaster

Designed to work with the efficiency of expensive pressurized abrasive blasters for a fraction of the cost, the Tri-Con 700 is a fast, portable alternative to bulky pressure systems. Patented Metal aspirator tubes are inserted directly into the bag or bucket of dry abrasive or cleaning media. No cumbersome hopper is ever needed. Ambient air and abrasive material mix in the aspirator tubes to provide a constant flow of material to the work surface. Regulate amount of media flow by using a regulator to regulate your air pressure (air regulator and gauge can be purchased separately if needed). Squeeze the trigger and clean away rust, paint, dirt, graffiti, to name just a few. Unit can also be used as a pressure washer.

....................................................................................................................................................Price.................. $42.19